Aero-Sharp Solar Inverter Fault Light On
Aero-Sharp is a well-known brand when it comes to solar inverters. They are one of the most popular brands on the market and are known for their quality products. However, even the best brands can have issues and that’s what we’re going to be talking about today. Apparently, some users have been having problems with their Aero-Sharp solar inverters and the fault light is coming on. This can be a big problem because it can mean that there is a serious issue with the inverter and it needs to be repaired or replaced.
If you have an Aero-Sharp solar inverter and the fault light is on, then you need to take action immediately. The first thing you should do is check the manual to see what the fault light means. There could be a number of different reasons why the light is on and it’s important to diagnose the problem so that you can fix it. Once you know what the problem is, you can either try to fix it yourself or contact a qualified technician to do it for you.
If you’re not comfortable working with electrical equipment, then it’s probably best to contact a technician. However, if you’re handy and you’re confident that you can fix the problem, then you can try to do it yourself. Just be sure to follow the instructions in the manual carefully so that you don’t cause any further damage to the inverter.
What to do about a Fault Light on Aero Sharp Inverter Issue?
The first thing to try is a reboot of the system using the shutdown procedure below.
- Turn off the SOLAR SUPPLY MAIN SWITCH or Inverter AC Isolator (if installed).
- Turn off the PV Array DC Isolator located at the inverter.
- Wait for approximately 1 minute.
- Turn on the SOLAR SUPPLY MAIN SWITCH or AC Isolator (if installed).
- Turn on the PV ARRAY DC Isolator.
- Wait a few minutes for the inverter to restart.
- Check to see if the error has cleared.
If the fault light continues to be lit it looks like you may have a fault that will require the inverter to be repaired or replaced.
